TLB Tyre Sizes: Front and Rear Tyres for Backhoe Loaders

A TLB digs, loads and drives between sites, often on the same day. The right tyres keep it working. Here are the common sizes and how to choose them.

Proclassic Tyres · Updated 20 November 2026 · 3 min read

Quick answer

Most 4WD TLBs, including the JCB 3CX and CAT 428, run 12.5/80-18 on the front and 16.9-28 on the rear. Some machines, such as many Case 580 models, use 19.5L-24 on the rear. 2WD machines often use 11L-16 or 10.5/80-18 on the front. Check the size moulded on your tyres before you order.

Find your size

TLB sizes are moulded on the sidewall, such as 16.9-28 12PR or 12.5/80-18 14PR. Fronts and rears are different sizes. Some machines leave the factory with alternative fitments, so read what is on your machine rather than going by the model alone.

Common TLB tyre sizes

MachineFront (4WD)Rear
JCB 3CX12.5/80-1816.9-28 (some 18.4-26)
CAT 428 / 43212.5/80-1816.9-28 (some 19.5L-24)
Case 58012.5/80-1819.5L-24 (some 16.9-28)
New Holland B-series12.5/80-1816.9-28
2WD machines11L-16, 10.5/80-18as above

Fitments vary by year, spec and market. Use this table as a guide and confirm on your sidewall.

What the numbers mean

  • 16.9-28: about 16.9 inches wide, for a 28-inch rim. The dash means bias (cross-ply) construction.
  • 19.5L-24: the L means a low-profile tyre, 19.5 inches wide on a 24-inch rim.
  • 12.5/80-18: 12.5 inches wide, sidewall 80% of the width, 18-inch rim.
  • 12PR, 14PR: ply rating, the strength of the casing. Higher is tougher and carries more load.

Choose the right tread

TreadBest for
R-4 industrialMost TLB work: construction sites, gravel, tar travel between jobs. Tough and long-wearing.
R-1 agricultural barSoft ground and mud. Grips well but wears faster and cuts more easily on hard, rocky sites.
F-3 industrial rib2WD front steering tyres.

For most contractors, R-4 is the right choice. It handles mixed ground and travels on tar without wearing out quickly.

Buying tips

  • Replace rears as a pair, and fronts as a pair.
  • On 4WD machines, match front and rear sizes to the original combination. A wrong pairing can strain the drivetrain.
  • Choose a higher ply for rocky sites and heavy loader work.
  • Keep the pressures right. Low pressure on a TLB causes sidewall damage and bouncing on the road.

TLB tyres from Proclassic

We supply front and rear TLB tyres in the common sizes, with delivery to site across Zimbabwe. Send us the sizes, quantity and machine and we will reply with stock and today’s price. See all sizes on our TLB, grader and forklift tyres page.

Get a price on WhatsApp

Send us these four details and we will reply with stock and today’s price:

  1. Tyre size, from the sidewall
  2. Quantity
  3. Vehicle or equipment, make and model
  4. Delivery location, or collect in Harare or Mutare
Send my request on WhatsApp

Or call +263 716 194 485 · info@proclassicgroup.com

Questions

Frequently asked questions

Still not sure? Send a photo of your tyre’s sidewall and we will identify it for you.

Ask on WhatsApp
What size tyres does a JCB 3CX use?

Usually 12.5/80-18 on the front and 16.9-28 on the rear. Some machines run 18.4-26 rears. Check your sidewall.

Can I fit tractor tyres to a TLB?

You can fit R-1 bar tyres for soft ground, but they wear faster and cut more easily on hard, rocky sites. Most contractors use R-4 industrial tyres.

What does 16.9-28 mean?

About 16.9 inches wide, for a 28-inch rim, in bias (cross-ply) construction.

Is 12PR or 14PR better?

14PR is a tougher casing that carries more load. Choose it for rocky sites and heavy work.

Do you deliver TLB tyres to site?

Yes. We deliver across Zimbabwe. Tell us your location when you ask for a quote.