Quick answer
Most counterbalance forklifts in Zimbabwe run either air-filled (pneumatic) tyres or solid tyres on the same rims. Solid tyres cannot puncture and suit yards with sharp debris, while pneumatic tyres ride softer on rough ground. Common sizes include 28x9-15 and 7.00-12 on the front and 6.50-10 or 18x7-8 on the rear, depending on the truck’s capacity.
Find your forklift tyre size
The size is moulded on the sidewall, written one of two ways:
- 28x9-15: overall diameter 28 inches, width 9 inches, rim 15 inches.
- 7.00-12: width 7 inches, rim 12 inches.
Some sizes have two names: 28x9-15 is also called 8.15-15. Front (drive) and rear (steer) tyres are usually different sizes.
Three types of forklift tyre
| Type | How it works | Best for |
|---|---|---|
| Pneumatic (air) | Tyre and tube, or tubeless, on a split rim | Rough yards and outdoor ground, where a soft ride matters |
| Solid (solid pneumatic / resilient) | Solid rubber, fits the same rim as the pneumatic tyre | Yards with nails, glass or metal scrap. Cannot puncture. |
| Press-on (cushion) | Pressed onto a steel band | Smooth indoor warehouse floors. Needs press-on wheels. |
Many operators switch from pneumatic to solid tyres to stop puncture downtime. Because solid pneumatic tyres fit the same rims, you can change without new wheels. Non-marking (grey) solid tyres are available for food plants and clean floors.
Common forklift tyre sizes
| Size | Typical position and truck |
|---|---|
| 6.50-10 | Front on 1.5 to 2.5 tonne trucks, rear on some 3 tonne trucks |
| 7.00-12 | Front on 2 to 3 tonne trucks |
| 28x9-15 (8.15-15) | Front on 3 to 3.5 tonne trucks |
| 18x7-8 | Rear on 1.5 to 2.5 tonne trucks |
| 5.00-8 | Rear on smaller trucks |
| 6.00-9 | Rear on 2.5 to 3.5 tonne trucks |
Fitments vary by make and model. Always confirm the size on your current tyres.
When to replace
- Solid tyres have a wear line moulded on the sidewall. Replace when the rubber wears down to it.
- Pneumatic tyres: replace when the tread is worn, or at cuts, bulges or repeated punctures.
- Replace in pairs on each axle, so the forks stay level and the truck stays stable.
- Chunking (pieces of rubber breaking away) means the tyre is overloaded, worn or not suited to the floor.
Forklift tyres from Proclassic
We supply pneumatic and solid forklift tyres for warehouses, factories, depots and timber yards, with delivery across Zimbabwe. Send us the size, type and quantity and we will reply with stock and today’s price. See all sizes on our TLB, grader and forklift tyres page.
Get a price on WhatsApp
Send us these four details and we will reply with stock and today’s price:
- Tyre size, from the sidewall
- Quantity
- Vehicle or equipment, make and model
- Delivery location, or collect in Harare or Mutare
Or call +263 716 194 485 · info@proclassicgroup.com